The Chroma 62024P 100V 50A is able to provide a constant power operating envelope to produce both a high voltage/low current and a low voltage/high current. IT also includes a 16 bit readback capability for accurate voltage and current readings, I/O ports providing 8 bit TTLs, DC-ON, fault output signal and remote inhibit as well as an output trigger signal for system timing measurements. Another unique capability of this power supply is the ability to create complex DC transient waveforms. This capability allows devices to be tested to DC voltage dropouts, spikes and other voltage variations making them an ideal choice for airborne device testing, inverter testing and other devices which will experience voltage interrupts. Applications include DC/DC converter and inverter voltage drop test, engine startup simulation, battery automated charging and electronic product life cycle test.

Output Ratings
• Voltage: 0-100V
• Current: 0-50A
• Power: 2400W
Line Regulation
• Voltage: 0.01%+10mV
• Current: 0.01%+12mA
Load Regulation
• Voltage: 0.01%+18mV
• Current: 0.01%+12mA
Voltage Measurement
• Range: 20V/100V
• Accuracy: 0.05%+0.05%F.S.
Current Measurement
• Range: 10A/50A
• Accuracy 0.1%+0.1%F.S.
Output Noise (0 ~ 20MHz)
• Voltage Ripple (P-P): 100 mV
• Voltage Ripple (rms): 15 mV
• Current Ripple (rms): 20 mA
OVP Adjustment Range
• 110% of Vset to 110% of Vmax
Slew Rate Range
• Voltage (with USB): 0.01V - 10V/ms
• Current (with USB): 0.001A - 1A/ms
Programming Response Time (Typical)
• Rise Time (Full & No Load): 10 ms
• Fall Time: 300ms(max)
Efficiency
• 0.85
Drift (8 hours)
• Voltage: 0.02% of Vmax
• Current: 0.04% of Imax
Temperature Coefficient
• Voltage: 0.02% of Vmax/?
• Current: 0.04% of Imax/?
Transient Response Time
• 3mS
10 % step change
• 250 mV
Voltage limit @ Series Mode
• 500V
AC Input Voltage Ranges
• 190 to 250Vac (single phase)